• Intended to be used by adults weighing≥ 66lbs (30kgs)
• For patients requiring CPAP or Bi-Level therapy
• Pressure Range: 3 to 30 cm H2O

Daily/After each use:

• Disassemble the mask according to the disassembly instructions.
• Rinse the frame, elbow and cushion under running water. Clean with a soft brush until dirt is removed.
• Soak the components in warm water with a mild liquid detergent for up to ten minutes.
• Shake the components in the water.
• Brush the moving parts of the elbow and around the vent holes.
• Brush the areas of the frame where the arms connect, and inside and
  outside the frame where the elbow connects.
• Rinse the components under running water.
• Leave the components to air dry out of direct sunlight. Make sure to squeeze the arms of the frame to ensure that excess water is removed.

Weekly:

• Disassemble the mask. The magnets can remain attached to the headgear during cleaning.
• Handwash the headgear in warm water with mild liquid detergent.
• Rinse the headgear under running water. Inspect to ensure the headgear is clean and detergent free. Wash and rinse again, if necessary.
• Squeeze the headgear to remove excess water.
• Leave the headgear to air dry out of direct sunlight.